Our Dynamometer

“The AWD 5000-FX dynamometer is capable of supporting speeds up to 175+ MPH and 2000+ HP. The maximum axle weight is 6,500 lbs and the track width range is 36”-86”. The AWD 5000-FX was designed for a variety of different testing scenarios – FWD/RWD Cars, Sport Compacts, Motorcycles and ATV’s. It is equipped with a Frenelsa eddy brake and you are able to perform acceleration, step, sweep and steady-state tests. • View in real-time torque/horsepower output, at steady and changing speeds, to instantly evaluate changes you’ve made to the engine’s fuel or timing maps. • Diagnose engine and drivetrain problems. • Troubleshoot drivability issues. • Run track ¼ mile or circle track lap simulations with reaction times that you determine in the software parameters. The AWD-5000-FX can be operated in AWD Mode while testing two-wheel drive vehicles. This process allows the non-driven axle to be spun by the dynamometer rollers at the same speed as the driven axle, eliminating the speed differential that occurs on two-wheel drive dynamometers and insures the safety of the vehicles differential.” -Dynocom/ Adrik Motorworks 

Two Wheel Drive Dyno Rates

 

$85   – Baseline (3 pulls for power & torque)

$100 – Baseline with Wideband Air Fuel Monitoring

$150 – Hourly Rental Fee

$175 – Hourly Rental with Wideband Air Fuel Monitoring & Boost monitoring 

All Wheel Drive Dyno Rates

 

$100 – Baseline (3 pulls for power & torque)

$125 – Baseline with Wideband Air Fuel Monitoring

$175 – Hourly Rental Fee

$200 – Hourly Rental with Wideband Air Fuel Monitoring

$240 – Hourly Rental with Wideband Air Fuel & Boost Monitoring

 

(If you would like to purchase your own wideband sensor to use on the dyno, there will be no charge for air fuel ratio monitoring.  You are responsible for bringing the sensor during testing. We use a 17025 bosch 4.9 sensor for the dyno.)